Advertising engraving machine full screen and material definition?

1. Full-screen definition of advertising engraving machine: The full screen of advertising engraving machine refers to the window that you need, which is displayed as the largest on the display.

2, advertising engraving machine material definition: advertising engraving machine material refers to the material processing equipment.

Advertising engraving machine full screen and material?

1, the advertising engraving machine full screen exit method: advertising engraving opportunities because of different software, the method of exit is also different. The same thing is to use the shortcut key to exit the full screen. The advertising engraving machine takes the ncstadio software as an example. You can press CTRL+ENTER to exit the full screen.

2, advertising engraving machine material:

(1) Advertising plate

Acrylic sheet / PVC foam board / PS organic board / KT board / PP board / Wantong board / Furong board / two-color board.

(2) advertising light box

Ultra-thin light box / blister light box / crystal light box.

(3) Advertising stickers

BK paper / lettering paper / fluorescent paper / window paper / light box stickers / gold and silver stickers.

(4) Advertising signs / department cards and table cards / mahogany signs.

(5) Advertising accessories

Advertising glue / advertising screw / nylon cable tie / advertising hanging shaft / light box aluminum / aluminum alloy slot angle / stainless steel slot angle / electronic ballast / buttonhole and buckle machine.

(6) Display equipment

X display rack / L display rack / roll up / poster frame / promotional table / hanging easel / information frame / Pop display rack / pull net display rack / water flagpole / windproof water injection treasure.

(7) Reflective consumables

Reflective film / crystal color grid / light storage film / body reflective logo.

(8) Photo consumables

PP adhesive / cold laminating film / PP synthetic paper / photo lamp / high gloss photo paper / gold and silver film / water-based canvas / oily canvas / photo film / indoor photo ink / photo PVC material

(9) Inkjet consumables

Mesh cloth / car stickers / digital inkjet cloth / single-sided perspective stickers / outdoor inkjet ink / light box signboard.

(10) Metal materials

Steel, alloy, copper, aluminum, etc., mainly used in mold manufacturing industry / rubber / cowhide / stone / fire board / cardboard / aluminum composite board / copper clad / resin board and other composite materials, horns / bronze / stamp / rubber Chapter and so on.

How to choose a tool according to the material of the advertising engraving machine?

1. Acrylic cutting processing, it is recommended to use single-blade spiral milling cutter. It is characterized by smokeless and odorless, fast, high efficiency, non-sticky, and truly environmentally friendly. Its special manufacturing process guarantees that processing acrylic does not explode. , very fine knife pattern (even without knife), the surface is smooth and flat. The surface needs to be frosted. It is recommended to use a double-edged three-blade spiral milling cutter.

2, MDF cutting processing (for advertising mold), it is recommended to use double-blade large chip spiral milling cutter, which has two high-capacity chip flutes, double-edged design, which has good chip removal function and reaches Very good tool balance, no blackening, no capping, long service life, etc. when processing high density boards.

3, aluminum plate cutting processing, it is recommended to use a single-blade special aluminum milling cutter. It does not stick to the knife during processing, and it has high speed and high efficiency.

4, cork, MDF, raw wood, PVC, acrylic large deep relief processing, it is recommended to use a single-blade spiral ball end mill.

5, precision small relief processing, it is recommended to use a round bottom knife.

6, no burr cutting processing above, it is recommended to use a single-blade, double-edged upper and lower cutting cutter.

7, metal engraving processing, it is recommended to use a single-blade, double-edged straight groove flat-bottomed knife.

8, high-density board, solid wood is recommended to use a tooth milling cutter.

9, 3D engraving knives, high concentricity, sharp edge, can do precision 3D engraving processing.

10, multi-layer board, plywood processing, it is recommended to use double-edged straight slot milling cutter.

11. The use effect of the lower cutter, the upper surface of the processed product has no burrs, and will not be rocked when processed.

12, metal mold processing milling cutter, it is recommended to use tungsten steel milling cutter, the surface is plated with purple black and hard titanium.

13. Diamond engraving knives are recommended for acrylic mirror engraving.

14. Multi-strip milling cutters are recommended for roughing particleboards.