The woodworking engraving machine is controlled by computer to complete the engraving operation, mainly processing on the wood, and then processing on the crystal, copper, aluminum, etc. The control of the engraving machine is realized by a single-chip computer, and the wood carving machine has decorative value in order to make the woodware more exquisite and beautiful. The use of engraving machines in the engraving industry can reduce manual operations and increase work efficiency and work time.
What you need to do in daily use is to clean the engraving machine. After each use of the engraving machine, you have to clean the platform of the engraving machine and the dust on the transmission system. It is important to wear a mask when cleaning, to prepare for dust, and not to inhale dust into the body. If the engraving machine is not used for a long time, it must be cleaned, and the engraving machine should be refueled regularly to maintain the flexibility of the transmission system, that is, the engraving machine is not degraded due to lack of function.
Before using the engraving machine, check if the engraving machine screws are tightened and if there are other parts falling off or damaged. It has been found that the screws are loose and need to be tightened. If there are other parts, they must be repaired. The speed of the tool should not be too fast during operation. Otherwise, the wear caused by the high speed is serious, and the tool may be damaged. The normal speed should be determined. In short, the cleaning and maintenance of the engraving machine must be cleaned regularly, regularly maintained, and the problem can be found in the woodworking engraving machine manufacturers for maintenance.
