How does the advertising engraving machine maintain the embossed effect?

1. Pay attention to maintenance: In the process of use, the maintenance of the advertising engraving machine must be strengthened to extend the service life of the advertising engraving machine as much as possible. After each use of the advertising engraving machine, be sure to clean the advertising engraving machine and add oil to the rails to avoid environmental corrosion. Because the engraving machine uses self-lubricating wear-resistant screw rods, so It only takes one quarter to add lubricant in use.

2, the working voltage must be between 210230, if the voltage is not required, you must use a regulated power supply.

3. Spindle motor protection: If the engraving motor stops or the motor speed is uneven, please cut off the power immediately and contact the dealer for repair. If the motor can't be powered when the motor is stopped, the motor's meridian will burn off immediately. Please pay attention when using the user.

4. The environment must meet the working requirements of the computer.

5. Power protection: The interval between repeated power-on shall not be less than 30 seconds.

6, the operation must pay attention to safety; advertising engraving machine belongs to the mechanical processing equipment, should be operated according to the operation requirements of the machine tool, can not wear gloves, can not contact the advertising engraving machine is a more professional equipment, if the failure, promptly contact the dealer Professionals can only be repaired if they have permission from the dealer.

7. Cannot add coolant when cutting: When cutting with a column knife (refers to wood plexiglass snow floating board, etc.), adding coolant will seriously affect the cutting of the cutting chips and cause the tool to break.

8. Use of spindle motor: The engraving motor of advertising engraving machine has higher value, so we must pay attention to the correct use of the motor. The speed of the motor is inversely proportional to its life. When the motor is running, it must ensure the water circulation, and add appropriate amount of preservative. When using the motor, pay attention to the parameters provided in the reference manual.

9, fan maintenance: regularly clean the fan dust.

10, the protection of the chuck: the motor chuck and the tool are fixed by the friction of the metal, so install the tool to refuel, to prevent long-term disassembly or corrosion of the coolant and cause disassembly difficulties.

11. The power supply must have good grounding (must have a ground wire). Otherwise, the casing is well connected to the grounded conductor.