Now the difficulty of the woodworking engraving machine is very low. In fact, many things are completely designed inside the program. Since a lot of information has been designed inside the program, each parameter that needs to be input by itself is more important data. When we operate the woodworking engraving machine, we must understand the meaning of each parameter and input the parameters according to the requirements of our engraving machine. Next, follow the CNC network Xiaobian together to understand the details of the woodworking engraving machine parameters detailed engraving machine parameters set up!
Setting parameters: This function is used to open the parameter window for parameter setting, which is three parts: user parameter, manufacturer parameter and developer parameter.
Restore Vendor Parameters: This function is used to restore the vendor parameters to their factory values. Parameter backup: This function is used for backup of parameters for future use.
Parameter backup to USB flash drive: This function is used to output system parameters to a USB flash drive as a file. Parameter Recovery: This function restores the parameters to the last set value.
Restore parameters from the USB flash drive: This function is used to restore the parameters saved by the USB flash drive to the system.
Change password: This function can effectively protect the security of parameter settings. If the parameter modification requires permission, that is, password, you need to enter a new password.
Y-axis mirroring: Set the Y-axis for mirroring. X-axis mirroring: Set the X-axis for mirroring. Processing speed: The effective processing speed of woodworking engraving machine is the interpolation speed of machining instructions such as standard code G01, G02, G03. Optimize the Z-direction knife speed: Whether to move in the Z-direction vertical direction, use the G00 speed to lift the knife.
The idle (G00) command uses a fixed feedrate override of 100%: this parameter is an option. Indicates whether the system ignores the influence of the feed rate when executing the lost motion command. Thus, when the magnification is changed, the speed of the lost motion is not affected.
Default speed: Whether to abandon the speed specified in the machining program, use the system default speed set above.
Use default speed: Indicates whether the system abandons the spindle speed specified in the machining program and uses the system default speed set by the system.
IJK incremental mode: Whether the center programming (IJK) is incremental mode, the IJK value used by arc programming generated by some post-processors is an incremental value. When the pause or end is completed, the spindle is automatically stopped (requires restart): Set whether to automatically stop the spindle rotation when a machining program is paused or finished.
Speed adaptive optimization: Whether to allow the system to optimize the machining speed according to the connection characteristics of the machined workpiece.
Free-range speed: Popularity refers to the speed when the machine is running empty, that is, the speed of the standard code G00 command. Use Z down knife speed: Whether to use a specific speed drop speed when moving in the Z direction vertically downwards.
