The embossed knife path is a necessary setting for embossing engraving using a stone engraving machine. How should I set up the embossing knife path of the stone engraving machine? Let me take a look at it:
As a stone engraving machine technology operator, we know that usually when we open Artcam, there are two options under "Generate Model": generate a new model and generate a model from the image. We choose to "generate the model through the image", and then select the graphic we need to sculpt. After selecting it, the system will prompt us to set the model size. We can adjust the height or width of the graphic below the image size, and the height in the Z direction is the overall depth of the relief. There are five points for the origin position to choose from. In general, we can choose the center or the lower left corner as the origin. After all the data is modified, click "Accept" to preview the 3D effect. Click on 3D View to preview the effect of the relief. If you feel the imbalance, you can re-edit the relevant size.
The next step is to generate a stone engraving machine program, which is what we usually call the tool path. Finding the “3D Toolpath” under the toolpath The first option is to machine the relief. Under the processing relief option we can select the tool, set the material, and finally click "now", the computer will automatically calculate the path. After the path is all saved, you can save it. Save the format and pay attention to it. Select “*.mmg”. Finally, the tool path can be loaded into the stone engraving machine and processed.
