Introduction to the use of bearing packaging machine

1. The paper towel packaging machine must observe the equipment components within the specified time. It is best to control the time every month. First, the worm wheel and the worm are used on the same lubricating block. The movable parts such as the bearing have no rotation and wear. How is it? If there are obvious deficiencies, it must be repaired immediately. It is absolutely impossible to use it.

2, the machine must be placed in a dry and hygienic room, can not be exposed to the atmosphere containing acid and other gases that can corrode the body inside, the only way to use the paper towel packaging machine.

Regarding the bearing packaging machine, we must first prepare the material of the bearing packaging machine:

1. Calcium plastic corrugated box, the total weight of each box does not exceed 25kg, and the box is loved with plastic strapping.

2, nail box (wooden box), the total weight of each box does not exceed 30kg, and the outside of the box is bundled with blue steel belt.

3, double corrugated boxes, the total weight (gross weight) per box? Not more than 25kg, the outside of the box is bundled with plastic strapping.

When loading the bearing product with the inner packaging into the box, the plastic bag or plastic film should be placed in the box first; if there is a gap in the box, it should be filled with dry materials such as corrugated cardboard and paper dust.

The inner packaging of the bearing is divided into three categories according to the anti-rust period:

1. General anti-rust period packaging: one year anti-rust, suitable for general purpose bearings.

2, short anti-rust period packaging: anti-rust period of 3 to 6 months, suitable for large-volume delivery to the same subscriber, the bearings will be put into use in a short period of time. According to the agreement between the two parties, the principle of convenient use is adopted, and simple packaging is adopted. Long anti-rust period packaging: anti-rust period of two years, suitable for special and precision bearings.

These are a specific use of it, but similar not only needs to be used, but also well maintained.
For more products, please visit: http://www.supplyforever.com/

Analysis of maintenance and repair methods for hardware imported bearings

Cleaning of imported bearings: Gasoline and kerosene are commonly used as ordinary cleaning agents. When disassembling the lower bearing for inspection, first record the appearance of the imported bearing, confirm the residual amount of the lubricant, and start the washing of the bearing after sampling the lubricant for inspection. The cleaning is divided into coarse cleaning and fine cleaning, respectively, placed in the container, first placed on the bottom of the metal mesh, so that the imported bearings do not directly contact the dirt of the container.

1. Rough cleaning, use brush to remove grease and adhesive, and after it is almost clean, transfer to fine washing. If the imported bearing is rotated with dirt, it will damage the rolling surface of the imported bearing and should be noted.

2, fine fine washing, is to rotate the imported bearings in the cleaning oil while carefully cleaning. In addition, the cleaning oil should always be kept clean.

Inspection and judgment of imported bearings: In order to judge whether the removed imported bearings can be used, it is necessary to check after the imported bearings are cleaned.

The inspection contents include: monitoring the operating status, replenishing and replacing the lubricant, and checking the periodic disassembly. This is the operating standard for maintaining the best mechanical operating conditions and is carried out regularly. As a maintenance item during operation, there are rotating sound, vibration, temperature, and lubricant status, and separate bearings such as tapered roller bearings can be inspected for the rolling surfaces of the rolling elements and the outer ring.

Check the raceway surface, the rolling surface, the state of the mating surface, the wear of the cage, the increase of the inlet bearing clearance, and the damage abnormality with irrelevant dimensional accuracy. For non-separable miniature ball bearings, use one hand to support the inner ring horizontally and rotate the outer ring to check if it is smooth.

Large imported bearings can not be rotated by hand. Pay attention to the appearance of rolling elements, raceways, cages, ribs, etc. The importance of imported bearings is more important and must be carefully checked.

In the use of imported bearings, we must regularly maintain and repair the bearings, so that the performance of imported bearings can be maintained, and the life of imported bearings can be extended.
For more products, please visit: http://www.bearingkingdom.com