IKO bearings usually have limited installation space. In most cases, bearings are based on mechanical design or other design limitations. Type and size of bearing, thrust angular contact ball bearing. What types of bearing seals are there? . Therefore, the decision to select the bearing diameter of the New Territories North Region is based on. Therefore, the main dimension tables of standard tapered roller bearings are sized according to international standards.
There are many factors that affect the service life of IKO bearings, which can be further explained by the use factors and internal factors.
The use factors mainly refer to whether the installation adjustment, use and maintenance, maintenance and repair, etc. meet the technical requirements. According to the technical requirements of IKO bearing installation, use, maintenance and maintenance, monitor and check the load, speed, working temperature, vibration, noise and lubrication conditions of the tapered roller bearing in operation, find the abnormality and find the cause immediately. Adjust to bring it back to normal. The installation condition is one of the primary factors in the use factor. The bearing is often changed due to improper installation, and the force state between the parts of the whole bearing changes, the bearing runs in an abnormal state and ends the service life early.
In order for IKO bearings to be fully utilized and to maintain their proper performance for a long time, regular maintenance (regular inspection) must be performed. Through proper periodic inspections, early detection of failures and prevention of accidents are important to improve productivity and economy.
1, cleaning
When the IKO bearing is removed for inspection, the appearance record is first recorded by photography. Also, verify the amount of lubricant remaining and sample the lubricant before cleaning the tapered roller bearing.
a. The cleaning of the bearing is carried out by rough washing and fine washing, and a metal mesh frame can be placed on the bottom of the used container.
b. When rough washing, remove the grease or adhesive with a brush or the like in the oil. At this time, if the IKO bearing is rotated in the oil, be careful that the rolling surface will be damaged by foreign matter or the like.
c. When fine washing, slowly rotate the IKO bearing in the oil, which must be carried out carefully.
The cleaning agent generally used is a neutral non-aqueous diesel oil or kerosene, and a warm alkali liquid or the like is sometimes used as needed. Regardless of which cleaning agent is used, it is often filtered and kept clean. Immediately after cleaning, apply anti-rust oil or anti-rust grease to the tapered roller bearing.
2, inspection and judgment
In order to judge whether the removed IKO bearing can be reused, it is important to check its dimensional accuracy, rotation accuracy, internal clearance, mating surface, raceway surface, cage and seal. Regarding the inspection result, it can be judged by a person who uses a conventional bearing or a tapered roller bearing. The criteria for judgment vary depending on mechanical properties and importance, inspection period, and the like. IKO bearings must not be reused if they are damaged and must be replaced.
For more information and purchase please visit: https://www.supplyforever.com
